As an installer or aircraft operator, you can lock the tracking menu so that the tracking settings cannot be changed. 


The action of locking the tracking menu will remove it from the user interface and menu of the DZMx. Once locked, the tracking menu can only be accessed and unlocked from within DZMx Connect once logged in as an installer. 



Please find instructions for accessing DZMx Connect and locking/unlocking the tracking menu. 

You require:

  • An installed and powered Flightcell DZMx
  • Laptop or Smart Device
  • Ethernet cable if not using Wi-Fi


Use DZMx Connect to Setup

 

DZMx Connect is a browser utility that is used to configure and operate the DZMx. An app version is available from the Apple App Store and Google Play for use on smart devices over DZMx Wi-Fi. It is recommended that DZMx Connect is used to alter DZMx configuration settings, as it is a quicker and more intuitive interface than using the DZMx keypad and display.

 

Hardwired Ethernet Computer Connection 

1. Connect a computer to the DZMx Ethernet port.

2. Power up the DZMx and wait for it to initialise fully.

3. Open a web browser, type in 192.168.4.1 in the address bar and press enter. The home screen of DZMx Connect opens in the browser.

 

Wireless Laptop Connection 

1. Power up the DZMx and wait for it to initialise fully.

2. Check that Wi-Fi is enabled. Look for a Wi-Fi icon located at the top right-hand side of the DZMx display. If the Wi-Fi icon is not present, it can be checked and enabled in one of three ways:

    a. Press and hold the keypad MODE button until "Enabling Wi-Fi" is displayed on the display. Wi-Fi can also be disabled with a subsequent press of the MODE button.

    b. Using the DZMx keypad, navigate to: MENU>>Hardware Config>>Wireless and Networks>> Wi-Fi Enable and select Yes.

    c. Connect a PC or laptop to the DZMx via an Ethernet cable. Type 192.168.4.1 into a web browser and navigate to Connectivity>> Wi-Fi and toggle the switch to ON.

3. Configure the laptop to connect to the DZMx WiFi: » Default SSID: DZMx Wi-Fi» Default password: flightcell (all lower case) 

4. Open a web browser on the laptop and type in 192.168.2.1 then press enter; the home screen of DZMx Connect will open within the browser.

 

WiFi Connection 

1. Configure the smart device to connect to: » Default SSID: DZMx Wi-Fi» Default password: flightcell (all lower case)

2. Open the DZMx Connect app (DZMx Connect can be downloaded from Google Play or the App Store). The initial screen is a discovery screen and the DZMx will be discovered automatically. The DISCOVER button is only required if the process needs to be repeated.

3. Click on the discovered DZMx unit to open navigation and settings options.
 


Login as an Installer 

Press login and set the "Authenticate as" to Installer and the pin as "2468"



The Tracking Menu and Settings

Logging in as an installer gives you full access to all of the functions and settings of the DZMx. The Main Menu options will expand and have more options available to you.

Click the "Settings" and then expand the "Tracking" menu options



Click the "General" tracking settings option



You will find the "Lock Tracking Menu" which is a simple toggle. Please click it to toggle it either to the right to lock or to the left to unlock. 

Click "Done" once you are happy with your settings.



Once you have locked or unlocked the tracking settings, you must power cycle the DZMx for the settings to take effect.


Please don't hesitate to contact our tech support team on [email protected] if you have any questions or require further assistance.