Using DZMx Connect, you can export your DZMx configuration and load it onto another DZMx. You may also wish to export your configuration and send it to technical support if requested, or when you purchase a new DZMx.
Use DZMx Connect
DZMx Connect is a browser utility that is used to configure and operate the DZMx. An app version is available from the Apple App Store and Google Play for use on smart devices over DZMx Wi-Fi. It is recommended that DZMx Connect is used to alter DZMx configuration settings, as it is a quicker and more intuitive interface than using the DZMx keypad and display.
Hardwired Ethernet Computer Connection
1. Connect a computer to the DZMx Ethernet port.
2. Power up the DZMx and wait for it to initialise fully.
3. Open a web browser, type in 192.168.4.1 in the address bar and press enter. The home screen of DZMx Connect opens in the browser.
WiFi Laptop Connection
1. Power up the DZMx and wait for it to initialise fully.
2. Check that Wi-Fi is enabled. Look for a Wi-Fi icon located at the top right-hand side of the DZMx display. If the Wi-Fi icon is not present, it can be checked and enabled in one of three ways:
a. Press and hold the keypad MODE button until "Enabling Wi-Fi" is displayed on the display. Wi-Fi can also be disabled with a subsequent press of the MODE button.
b. Using the DZMx keypad, navigate to: MENU>>Hardware Config>>Wireless and Networks>> Wi-Fi Enable and select Yes.
c. Connect a PC or laptop to the DZMx via an Ethernet cable. Type 192.168.4.1 into a web browser and navigate to Connectivity>> Wi-Fi and toggle the switch to ON.
4. With Wi-Fi enabled on the DZMx, connect your laptop to the DZMx Wi-Fi network.
Default SSID: DZMx Wi-Fi» Default password: flightcell (all lower case)
5. Open a web browser on the laptop and type in 192.168.2.1 then press enter; the home screen of DZMx Connect will open within the browser.
Click here to watch a short video explaining the DZMx Connect capabilities (demonstrated on the app version).
Export/Import your DZMx Configuration
Select your DZMx from the Home Screen as seen in the above image. You will then be taken to the Main Menu and you will see the Contacts Manager screen.
Tap the "Settings" menu icon and you will be taken to the settings screen. Please note the icons in the top right corner of the DZMx Connect app.
Click this icon to Export your current DZMx settings file
Click this icon to Import a DZMx settings file from your laptop
With the import, you will be prompted to click and drag the settings file into the upload window or navigate to the file and select it.
