DZMx Connect is a browser utility that is used to configure and operate the DZMx. An app version is available from the Apple App Store and Google Play for use on smart devices over DZMx Wi-Fi. It is recommended that DZMx Connect is used to alter DZMx configuration settings, as it is a quicker and more intuitive interface than using the DZMx keypad and display.

 

Hardwired Ethernet Computer Connection 

1. Connect a computer to the DZMx Ethernet port.

2. Power up the DZMx and wait for it to initialise fully.

3. Open a web browser, type in 192.168.4.1 in the address bar and press enter. The home screen of DZMx Connect opens in the browser.

 

WiFi Laptop Connection 

1. Power up the DZMx and wait for it to initialise fully.

2. Check that Wi-Fi is enabled. Look for a Wi-Fi icon located at the top right-hand side of the DZMx display. If the Wi-Fi icon is not present, it can be checked and enabled in one of three ways:

    a. Press and hold the keypad MODE button until "Enabling Wi-Fi" is displayed on the display. Wi-Fi can also be disabled with a subsequent press of the MODE button.

    b. Using the DZMx keypad, navigate to MENU>>Hardware Config>>Wireless and Networks>> Wi-Fi Enable and select Yes.

    c. Connect a PC or laptop to the DZMx via an Ethernet cable. Type 192.168.4.1 into a web browser and navigate to Connectivity>> Wi-Fi and toggle the switch to ON.

3. With Wi-Fi enabled on the DZMx, connect your laptop to the DZMx Wi-Fi network. 
Default SSID: DZMx Wi-Fi» Default password: flightcell (all lower case) 

4. Open a web browser on the laptop and type in 192.168.2.1 then press enter; the home screen of DZMx Connect will open within the browser.

Click here to watch a short video explaining the DZMx Connect capabilities (demonstrated on the app version).

 

WiFi Smart Device Connection 

1. Configure your smart device to connect to: » Default SSID: DZMx Wi-Fi» Default password: flightcell (all lower case)

2. Open the DZMx Connect app (DZMx Connect can be downloaded from Google Play or the App Store). The initial screen is a discovery screen and the DZMx will be discovered automatically. The DISCOVER button is only required if the process needs to be repeated.

3. Click on the discovered DZMx unit to open navigation and settings options. Click here to watch a short video explaining the DZMx Connect app capabilities